Heat Exchanger (with standard barb connectors)

A Heat Exchanger is a small unit that is plumbed inline with your engine's radiator hoses and allows hot coolant circulating through your engine, heating system & radiator to come into close contact with cool water that you wish to heat up. The cool water is pumped through the Heat Exchanger via a 12V pressure pump (sold separately). Although the two never mix, the plumbing inside the heat exchanger allows heat to be transferred from the hot coolant through to the cold water, heating it up as a result.  

This results in "instant" hot water, without the need for carrying separate gas bottles, or hot water heaters. It is quick, efficient, and takes up hardly any space in the engine bay.

Our Heat Exchangers are hand-made by Glind in QLD, Australia. They are built to marine grade standards and utilise brass fittings and plumbing internally, as well as utilising stainless steel bolts and fittings externally to prevent corrosion. 

They are suitable for pumping both fresh and salt water. 

All GLIND heat exchanger with 1/2″ barbed fittings on both the inlet and outlet fresh water ports. Simply use radiator clamps with 1/2″ hose in and out for ease of use.  For compatibility and ease of use, the engine coolant side is 5/8″ barb which is the most common heater hose size. This allows the heat exchanger to be placed in line or hidden so that the outlet of the fresh water delivery hose can be run straight to a shower, sink, or to an external shower connector fitting at the front or rear of a vehicle.

The Glind heat exchanger as it sits on the mount bracket, measures 335 mm long and is 105 mm high. Remember to add a little on each end to accommodate for hoses. The beauty of this heat exchanger is that it can be mounted horizontally or vertically so fitting becomes simpler. If you need a tight hose bend on the ends, use the pre-moulded heater hose.

*** NOTE: This Heat Exchanger comes with standard barb connectors for in-line connection to your vehicle's heating system via the radiator hoses and barb connectors for connection of the cold water source and heated water output.

See our other listing for an alternate version that has John Guest connectors for connection to the cold water source and heated water output. ***

This is the central component of the 4xAdventures Hot Water and Shower System for Overlanding. See here for more details: https://youtu.be/Oc2A0uA3W2s

*** Shipping Note: Please be advised that although we process your order typically within a few hours, actual shipping times may be affected by the manufacturer's processing and shipping schedule. They typically process our order and ship the product via Australia post within 3 business days, however on rare occasions, this has taken up to 5 business days to process. Please keep this in mind when ordering. Thankyou kindly. ***